Standard Duty 333 Grapple Rake 60" - Double Grapples

The Perfect Grapple Rake for Small & Medium Sized Equipment!

The "Standard Duty" 333 Grapple Rake is ideally made for utility and compact tractors where weight may be a consideration. It features a wide 50″ opening to allow for large material capacity. The rake tines are reinforced with rake supports for added strength. Cylinder(s) are included and a hose kit is standard for the double grapple as well as cylinder guards. See the Grapple Selector Guide to choose the grapple that is correct for your equipment and useage.  Includes Cylindar Guards, Hose Guard, Supply Hoses & Pioneer Couplers. Choose between JD 400/500 or Skid Steer Quick Attach Brackets to be welded on before shipment.  See our Grapple Spec Sheet in Other Documents below, to make the correct choice for your equipment and usage.

Size Guide for Couplers:

IMPORTANT CONSIDERATIONS WHEN SHOPPING FOR A GRAPPLE

• Do you want to add a grapple to your existing bucket or remove your bucket and attach a grapple rake?
• Do you have auxiliary hydraulic outlets? If not, see accessories for Xtra Valve Kit. If you have a set of outlets in the rear of your tractor you might want to run a set of hoses from those outlets to the front of your tractor. Conceal them and secure with cable ties so the hoses do not get in the way. Now you can put couplers on the ends and have a disconnect point at the front of the tractor instead of having long hoses to manage.
• How do you intend to use the grapple? Cleaning barns, picking up loose hay, moving round hay bales, brush or construction debris? Choose the right grapple for your job.
• What is the lift capacity of your loader? Choose a grapple that is less than 50% of your loader lift capacity but still strong enough to do the job.
• What is your price range? This is a slippery slope. Choosing a low price grapple may cost you more in the long run, plus frustrate you.

IMPORTANT FEATURES TO LOOK AT WHEN CHOOSING A GRAPPLE

The width of the opening may be the most important feature of a grapple. A wider grapple opening means you can grab more material. Some are even wide enough to grab large round bales. Spacing of tines is important. For brush we think 6” is ideal. It is wide enough to sift the dirt yet tight enough to hold smaller brush. For rock buckets we think 3” is ideal for the same reasons. Single grapple or double grapple? We sell far more doubles than singles. Mainly because with a double grapple you can clamp down on uneven loads. Almost all brush loads will be uneven. A single grapple may be preferred for picking up even material such as hay bales. A grapple that weighs over 50% of your lift capacity may limit the material you are able to carry. Choose one slightly less than 50%. Getting one too light will be costly in the long run.

SOLVING TREE & BRUSH PROBLEMS SINCE 1992!

All products have been carefully manufactured and tested. Should our product prove defective, or appear to be, please discontinue use immediately and contact us. Not responsible for any damage or claims beyond the selling price of the product. No returns allowed without the express written consent of Precision Manufacturing.